Author Topic: Drones, the next generation: What new tech can do  (Read 1910 times)

0 Members and 1 Guest are viewing this topic.

Offline Ford289HiPo

  • Hero Member
  • *****
  • Posts: 987
  • Don't take life seriously; No one gets out alive
Drones, the next generation: What new tech can do
« on: February 10, 2013, 10:20:04 pm »

http://www.cbsnews.com/8301-505263_162-57568330/drones-the-next-generation-what-new-tech-can-do/


CBS News) The controversy over the use of drone attacks isn't stopping the military from testing the next generation of planes without pilots. The newest drones can be completely guided by computers, not people.

CBS News' David Martin shared some of the latest technology from Naval Air Station Patuxent River in Maryland.

The X-47B is capable of carrying 4,000 pounds of weapons, although right now it is loaded only with instruments as it is launched from a land-based catapult. Remember, there is no pilot on board with a stick and rudder. It is responding to a computer program. Call it "point and click" flying, and according to Capt. Jamie Engdahl, the X-47B is taking drone warfare to a whole new level. Engdahl said, "The test went very well and it's very significant because this is the first time that we're actually doing catapult shots with a vehicle with nobody in the cockpit."

The x-47B has already conducted taxi tests aboard the USS Truman, and later this year, will attempt to take off and land from the deck of an aircraft carrier.

The Navy has not yet decided whether to put weapons on the X-47B. It could be used for other missions like reconnaissance or electronic jamming of enemy air defenses. But it could also be armed.

Unmanned aircraft offer the obvious advantage of being able to attack heavily defended targets without risking a pilot's life. Putting them aboard an aircraft carrier would give the Navy the capability to launch strikes virtually anywhere in the world. Engdahl said, "The biggest thing is that you don't have to worry about permission from other countries to operate a vehicle from foreign airfields."


**********************************************************************************************

 8888crybaby I can't get the embed code to work anywhere, so you'll have to go to the link to see the clip. 8888crybaby
I wonder when the lies will stop and truth begin, even as grim as the truth may be. And then I remember that for 70 years, the reign of terror in Russia called itself "the people's government." We have so far to fall, yet we are falling fast and Hell yawns to receive us.

Offline DCPatriot

  • Hero Member
  • *****
  • Posts: 45,998
  • Gender: Male
  • "...and the winning number is...not yours!
Re: Drones, the next generation: What new tech can do
« Reply #1 on: February 10, 2013, 10:28:48 pm »
How about being to pin-point where a person is by 'locking' in on your cell phone signal?  To within 1.6 feet?

Do they have something that can appear as if you dropped dead with a heart attack?   

Just asking.


RIP Andrew.
"It aint what you don't know that kills you.  It's what you know that aint so!" ...Theodore Sturgeon

"Journalism is about covering the news.  With a pillow.  Until it stops moving."    - David Burge (Iowahawk)

"It was only a sunny smile, and little it cost in the giving, but like morning light it scattered the night and made the day worth living" F. Scott Fitzgerald

famousdayandyear

  • Guest

famousdayandyear

  • Guest
Re: Drones, the next generation: What new tech can do
« Reply #3 on: February 10, 2013, 11:30:53 pm »

Oceander

  • Guest
Re: Drones, the next generation: What new tech can do
« Reply #4 on: February 11, 2013, 12:48:47 am »
reminds me of the flying saucer things in the movie The Incredibles.

Offline Atomic Cow

  • Hero Member
  • *****
  • Posts: 18,221
  • Gender: Male
  • High Yield Minion
Re: Drones, the next generation: What new tech can do
« Reply #5 on: February 11, 2013, 12:52:15 am »
The DARPA thing is a lot like the C.L.A.W. from Call of Duty: Black Ops 2.


http://www.youtube.com/watch?v=tfJebhNBgRA
"...And these atomic bombs which science burst upon the world that night were strange, even to the men who used them."  H. G. Wells, The World Set Free, 1914

"The one pervading evil of democracy is the tyranny of the majority, or rather of that party, not always the majority, that succeeds, by force or fraud, in carrying elections." -Lord Acton

famousdayandyear

  • Guest
Re: Drones, the next generation: What new tech can do
« Reply #6 on: February 11, 2013, 01:08:52 am »
what if you could "print" your own high cap mag or lower AR-15 receiver?


www.youtube.com/watch?v=sW3MMvKrkN0&playnext=1&list=PLK7A4dnZk8DsF4oC7SqJ1UngmqzLB8_6G&feature=results_video


Offline truth_seeker

  • Hero Member
  • *****
  • Posts: 28,386
  • Gender: Male
  • Common Sense Results Oriented Conservative Veteran
Re: Drones, the next generation: What new tech can do
« Reply #7 on: February 11, 2013, 01:37:45 am »
What technology, machines, tools and materials bridge from the "print" to the completed part?"

Somewhere there need to be lasers, jigs, grinders, cutters, blades, drills, etc.
"God must love the common man, he made so many of them.�  Abe Lincoln

famousdayandyear

  • Guest
Re: Drones, the next generation: What new tech can do
« Reply #8 on: February 11, 2013, 01:44:04 am »
What technology, machines, tools and materials bridge from the "print" to the completed part?"

Somewhere there need to be lasers, jigs, grinders, cutters, blades, drills, etc.

From what I understand:  Software (ie CAD 3D geometic description of said part), laser, malleable quick setting resin

Oceander

  • Guest
Re: Drones, the next generation: What new tech can do
« Reply #9 on: February 11, 2013, 02:48:39 am »
What technology, machines, tools and materials bridge from the "print" to the completed part?"

Somewhere there need to be lasers, jigs, grinders, cutters, blades, drills, etc.

Basically, nothing is needed.  There's an article about one project - to develop a printable gun that can be printed on one of the current printers, called RepRap, that sells for under $1,000 - here:  http://www.forbes.com/sites/andygreenberg/2012/08/23/wiki-weapon-project-aims-to-create-a-gun-anyone-can-3d-print-at-home/

And some guy has printed out a lower receiver and using real parts for the rest of it, assembled a firearm that he's put about 200 rounds through (at least as of the time of writing).  His blog post is here: http://haveblue.org/?p=1041

Allied with that is another printing process that allows one to print chemicals.  Right now the concept is to print pharmaceuticals, a fully functional printer of chemicals could be used, I should think, to print out the powder needed to print working rounds, too.

Some mighty interesting things might be afoot, if one could print out what one needed for self-defense at will.

Offline Ford289HiPo

  • Hero Member
  • *****
  • Posts: 987
  • Don't take life seriously; No one gets out alive
Re: Drones, the next generation: What new tech can do
« Reply #10 on: February 11, 2013, 11:55:54 pm »

http://www.youtube.com/watch?v=6lCUGPixEnk

Note to self- buy a bigger can of RAID and a lot of #7 shot. I don't think a flyswatter is going to work.
I wonder when the lies will stop and truth begin, even as grim as the truth may be. And then I remember that for 70 years, the reign of terror in Russia called itself "the people's government." We have so far to fall, yet we are falling fast and Hell yawns to receive us.