Author Topic: The first 3D printed organ -- a liver -- is expected in 2014  (Read 1017 times)

0 Members and 1 Guest are viewing this topic.

Offline Cincinnatus

  • Hero Member
  • *****
  • Posts: 5,513
The first 3D printed organ -- a liver -- is expected in 2014
« on: December 28, 2013, 07:07:58 am »
Holy moly. The possibilities!

Quote
Computerworld - Approximately 18 people die every day waiting for an organ transplant. But that may change someday sooner than you think -- thanks to 3D printing.

Advances in the 3D printing of human tissue have moved fast enough that San Diego-based bio-printing company Organovo now expects to unveil the world's first printed organ -- a human liver -- next year.

Like other forms of 3D printing, bio-printing lays down layer after layer of material -- in this case, live cells -- to form a solid physical entity -- in this case, human tissue. The major stumbling block in creating tissue continues to be manufacturing the vascular system needed to provide it with life-sustaining oxygen and nutrients.

Living cells may literally die before the tissue gets off the printer table.

Organovo, however, said it has overcome that vascular issue to a degree. "We have achieved thicknesses of greater than 500 microns, and have maintained liver tissue in a fully functional state with native phenotypic behavior for at least 40 days," said Mike Renard, Organovo's executive vice president of commercial operations.

A micron is one-millionth of a meter. To better understand the scale Renard is describing, think of it this way: A sheet of printer paper is 100 microns thick. So the tissue Organovo has printed is the thickness of five sheets of paper stacked on top of each other.

Printing hepatocytes -- the cells that make up most liver tissue -- isn't enough, however. There are multiple types of cells with different functions in tissue that must be combined to create a living human organ.

Organovo's researchers were able to bring together fibroblasts and endothelial cells, which perform the function of developing tiny vascular networks, allowing the company to achieve thick tissue with good cell viability, Renard said.

http://www.computerworld.com/s/article/9244884/The_first_3D_printed_organ_a_liver_is_expected_in_2014

More, lots more, at link.
We shall never be abandoned by Heaven while we act worthy of its aid ~~ Samuel Adams

Oceander

  • Guest
Re: The first 3D printed organ -- a liver -- is expected in 2014
« Reply #1 on: December 29, 2013, 06:36:03 pm »
Which brings up an interesting question:  what about printing food?  Printing a steak (I prefer to stay away from liver and onions, even if they're served with a nice chianti) wouldn't require as much fidelity to all of the internal structures as printing a functioning liver requires.

Offline Ford289HiPo

  • Hero Member
  • *****
  • Posts: 987
  • Don't take life seriously; No one gets out alive
Re: The first 3D printed organ -- a liver -- is expected in 2014
« Reply #2 on: December 29, 2013, 10:05:37 pm »
Which brings up an interesting question:  what about printing food?  Printing a steak (I prefer to stay away from liver and onions, even if they're served with a nice chianti) wouldn't require as much fidelity to all of the internal structures as printing a functioning liver requires.

You beat me to that comment! I was thinking the same.
I wonder when the lies will stop and truth begin, even as grim as the truth may be. And then I remember that for 70 years, the reign of terror in Russia called itself "the people's government." We have so far to fall, yet we are falling fast and Hell yawns to receive us.

Online DCPatriot

  • Hero Member
  • *****
  • Posts: 45,792
  • Gender: Male
  • "...and the winning number is...not yours!
Re: The first 3D printed organ -- a liver -- is expected in 2014
« Reply #3 on: December 29, 2013, 10:07:59 pm »
I'm thinking it's a great time to invest in Jack Daniel's stock.   :laugh:
"It aint what you don't know that kills you.  It's what you know that aint so!" ...Theodore Sturgeon

"Journalism is about covering the news.  With a pillow.  Until it stops moving."    - David Burge (Iowahawk)

"It was only a sunny smile, and little it cost in the giving, but like morning light it scattered the night and made the day worth living" F. Scott Fitzgerald

Online DCPatriot

  • Hero Member
  • *****
  • Posts: 45,792
  • Gender: Male
  • "...and the winning number is...not yours!
Re: The first 3D printed organ -- a liver -- is expected in 2014
« Reply #4 on: December 29, 2013, 10:11:13 pm »
Which brings up an interesting question:  what about printing food?  Printing a steak (I prefer to stay away from liver and onions, even if they're served with a nice chianti) wouldn't require as much fidelity to all of the internal structures as printing a functioning liver requires.

I'm too old to understand how this sh*t works.   :laugh:

What would a 3D printed tenderloin steak taste like?  What would it be made of?

And I love liver and onions....so long as it's tender and not shoe leather.
"It aint what you don't know that kills you.  It's what you know that aint so!" ...Theodore Sturgeon

"Journalism is about covering the news.  With a pillow.  Until it stops moving."    - David Burge (Iowahawk)

"It was only a sunny smile, and little it cost in the giving, but like morning light it scattered the night and made the day worth living" F. Scott Fitzgerald

Offline EC

  • Shanghaied Editor
  • Hero Member
  • *****
  • Posts: 23,804
  • Gender: Male
  • Cats rule. Dogs drool.
Re: The first 3D printed organ -- a liver -- is expected in 2014
« Reply #5 on: December 29, 2013, 10:20:48 pm »
Not printed, grown in a petri dish, but the principle is very similar.

http://www.bbc.co.uk/news/science-environment-23576143
The universe doesn't hate you. Unless your name is Tsutomu Yamaguchi

Avatar courtesy of Oceander

I've got a website now: Smoke and Ink

Oceander

  • Guest
Re: The first 3D printed organ -- a liver -- is expected in 2014
« Reply #6 on: December 30, 2013, 03:19:33 am »
You beat me to that comment! I was thinking the same.

Great minds think alike!